Page 1 of 1
Brake pressure
Posted: November 27th, 2011, 2:14 pm
by craigs
Looking at brake bias gauges - some top out at 1000 and some at 1500 psi. To buy the right one I need to know, what do our cars put out for peak pressure?
Or am I better off going all Spinal Tap and getting the one that goes to 2000 psi so I will have better braking?
Re: Brake pressure
Posted: November 27th, 2011, 2:17 pm
by dric53
Always go Spinal Tap!
Re: Brake pressure
Posted: November 27th, 2011, 3:05 pm
by kidkoh
I spiked my 1000psi gage the first.time I went into turn 3 at nhms the rear lasted the year but I will be going to 1500psi for next year
Re: Brake pressure
Posted: November 27th, 2011, 6:05 pm
by fvracer27
http://www.summitracing.com/parts/LNG-44126/
This is all you need
Don't you have a mychron 3?
What are trying to do with the gauges? Just set up or getting data?
Mark
Re: Brake pressure
Posted: November 27th, 2011, 6:13 pm
by craigs
yeah i have the aim dash - hadn't even thought of that actually. i was going to use the numbers for setup only until your post. i'll probably go analog for setup and aim for data.
Re: Brake pressure
Posted: November 27th, 2011, 6:27 pm
by fvracer27
craigs wrote:yeah i have the aim dash - hadn't even thought of that actually. i was going to use the numbers for setup only until your post. i'll probably go analog for setup and aim for data.
1 sensor for data is $150 So if you want to read front and rear $300 and it will take up 2 hard channels of the dash
Gauges $70 good for set up only
Unless you are going to use the Data I would just add gauges it works very well for giving you a start point when setting up the car.
Get gauges for the set up then add 1 brake sensor to get your data later. Saves $80 and saves a channel on the dash
Mark
Re: Brake pressure
Posted: November 27th, 2011, 6:34 pm
by craigs
fvracer27 wrote:
Get gauges for the set up then add 1 brake sensor to get your data later. Saves $80 and saves a channel on the dash
Mark
thats the plan
Re: Brake pressure
Posted: November 28th, 2011, 12:14 pm
by SR Racing
And we have both and are cheaper than the above prices.
Jim
Re: Brake pressure
Posted: November 28th, 2011, 2:01 pm
by fvracer27
SR Racing wrote:And we have both and are cheaper than the above prices.
Jim
I could not find the link on your site Jim otherwise I would have posted yours. Always support the FV vendors
![Laughing :lol:](./images/smilies/icon_lol.gif)
Re: Brake pressure
Posted: November 29th, 2011, 12:48 am
by SR Racing
[quote="fvracer27]
I could not find the link on your site Jim otherwise I would have posted yours. Always support the FV vendors
![Laughing :lol:](./images/smilies/icon_lol.gif)
[/quote]
No problem. We are AIM and Longacre dealers, so we have EVERYTHING.
![Smile :-)](./images/smilies/icon_smile.gif)
And I will never get around to posting everything on the web...
Here is our current line card:
http://sracing.com/Store/SR_Line_Card.pdf
Jim