Formula Car Trailer

Post Reply
NotMoss
Posts: 80
Joined: June 25th, 2006, 12:05 pm

Formula Car Trailer

Post by NotMoss »

Formula Vee Trailer: Made for Vees, but would obviously handle other similar size and weight cars. Wheel channels are approx. 10 feet long. Removable tire stop on left channel. Other dimensions: Overall width (excluding wheels) is approx. 58”. Wheel channels are approx. 7.5 inches wide (inside measure) and are approx. 50 inches center to center. Trailer and wheels were totally wire brushed and sandblasted then completely primed and painted with Rustoleum.. New hitch for 2 inch ball. New safety chains. New swing away jack. Completely new wiring and lighting. All wiring is in conduit or plastic sleeve for protection. Plug is standard 4-pin trailer. Wheel bearings repacked and have new rear grease seals. Tires are brand new and wheels are balanced. Axle is 2400 pound rated. Selling with Bill of Sale for titling (if required) as homebuilt. $550. Located in Northern Illinois about 35 miles East of Blackhawk. Contact: teds200@sbcglobal.net (See listing in SR Racing "For Sale" section for photos.)
Ted FV 07 (Retired)
NotMoss
Posts: 80
Joined: June 25th, 2006, 12:05 pm

Re: Formula Car Trailer

Post by NotMoss »

I'd like to move this trailer for some needed space. Open to reasonable offer.
Ted FV 07 (Retired)
NotMoss
Posts: 80
Joined: June 25th, 2006, 12:05 pm

Re: Formula Car Trailer

Post by NotMoss »

Trailer has been sold.
Ted FV 07 (Retired)
Post Reply