Rear Spring Rate

Post Reply
Edward Schubert
Posts: 110
Joined: September 10th, 2007, 5:06 pm

Rear Spring Rate

Post by Edward Schubert »

What spring rate would be a good starting point? I have a Citation 18B and will be running at Summit Point. Thanks
Ed Schubert
Zink/Citation 18B
edschubert@live.com
757-692-1181
brian
Posts: 1348
Joined: June 26th, 2006, 12:31 pm

Re: Rear Spring Rate

Post by brian »

Call Bob at LRE. 815-363-8560. The Zink has rockers which alter the geometry and that will effect the rate required. If anyone knows it will be Bob since he ran a Citation with great success. Larry at Campbell motosports is another great source.
The above post is for reference only and your results may vary. This post is not intended to reflect the views or opinions of SCCA and should not be considered an analysis or opinion of the rules written in the GCR.
Edward Schubert
Posts: 110
Joined: September 10th, 2007, 5:06 pm

Re: Rear Spring Rate

Post by Edward Schubert »

Thanks for the info Brian......Bob told what I needed....10", 150 pounds.
Ed Schubert
Zink/Citation 18B
edschubert@live.com
757-692-1181
Post Reply