Cam??

Post Reply
Veefan
Posts: 247
Joined: August 14th, 2007, 9:22 pm

Cam??

Post by Veefan »

I purchased a 1600 DP to build up to a Solo motor. I also received a bunch of parts including a few cams. I know the numbers might not mean anything since it might have been reground. But... any ideas of typically what engine this is for ??

It has Cofop on the Gear # VW 113.109.111 A
On the cam it has either 2BE or 28E cofop 0401091011

Thanks for any info
Lynn
Posts: 592
Joined: June 24th, 2006, 11:15 pm

Re: Cam??

Post by Lynn »

I have no Idea what the numbers mean, but no one uses stock cams. Many uses Emgle W-120 camshafts. My current engine has a W-130, but it might be a bit too much. My other engine has an custom ground Isky cam which is matched to the flow chart numbers for the heads.
69 Beach Solo Vee, #65 FM

85 Lynx B Solo Vee

71 Zink C4 Solo Vee
Dietmar
Site Admin
Posts: 650
Joined: June 24th, 2006, 11:56 am

Re: Cam??

Post by Dietmar »

The numbers are from a stock CoFap cam- don't know if it is/was reground.

Hope this helps
Dietmar
http://www.quixoteracing.com
Veefan
Posts: 247
Joined: August 14th, 2007, 9:22 pm

Re: Cam??

Post by Veefan »

Thanks, a stock 1600 or a stock 1200?
Post Reply