Brake drum wheel stud conversion

Post Reply
FVartist42
Posts: 17
Joined: May 17th, 2013, 11:54 am

Brake drum wheel stud conversion

Post by FVartist42 »

Does anyone know a wheel stud that can be used on our drums for standard and the ones that have been drilled to put in heli-coils? I've heard of a Honda for standard, but nothing for those that were drilled for heli-coils, which is the one I'm really interested in.
BLS
Posts: 441
Joined: May 11th, 2011, 7:52 pm

Re: Brake drum wheel stud conversion

Post by BLS »

Barry
Old Zink FV,
'87 Citation
brian
Posts: 1348
Joined: June 26th, 2006, 12:31 pm

Re: Brake drum wheel stud conversion

Post by brian »

Bugformance carries press in studs I use. They require drilling out the drum to fit the studs and the studs have a flange that needs to be cut down a bit to clear the brake shoes and hardware but they will work in drums that have lost the threads.
The above post is for reference only and your results may vary. This post is not intended to reflect the views or opinions of SCCA and should not be considered an analysis or opinion of the rules written in the GCR.
Post Reply