Page 1 of 1

Locost project

Posted: May 24th, 2012, 12:49 pm
by bobc
I have too many projects and must get rid of my Locost car. The frame is complete to Ron Chapmans book and is of 4130 steel with a steel underpan. The doner car is a Fiat 124. The engine has new bearing, oil pump and rings. The five speed trans has new syncros. Both the engine and trans are mounted in the car on new mounts. The cams are not in as I was going to have them reground. Ther is a 4-2-1 exhaust manifold and the stock carb along with two Dellorto carbs. All of the guages along with the front disk brakes and a complete rear end. Basically almost everything you need to finish the car. It also comes with a complete Fiat 124 including title. $3000 takes it all. I will enclude the book in the deal. The car is near Nashville, Tn.

Re: Locost project

Posted: May 26th, 2012, 8:18 am
by csingletary01
do you have any photos?

Re: Locost project

Posted: May 29th, 2012, 2:06 pm
by bobc
csingletary01 Check your messages