Lynx A Bodywork Wanted

Post Reply
satterley_sr
Posts: 237
Joined: June 27th, 2006, 3:27 pm

Lynx A Bodywork Wanted

Post by satterley_sr »

Long shot but, anyone have a Lynx A nose and tail they could sell? I also have a center section Lynx B I could trade or sell.

Dave

dsatterley at hot mail dot com
fv22
Posts: 86
Joined: June 24th, 2006, 8:38 pm

Re: Lynx A Bodywork Wanted

Post by fv22 »

I've got a spare lynx nose and tail but not sure if it's for an "A". Can you describe it or have a picture. Mine is kind of buried might be a day or 2 before I can get to it but if I know what the parts you're looking for I should know if what I have is correct.
satterley_sr
Posts: 237
Joined: June 27th, 2006, 3:27 pm

Re: Lynx A Bodywork Wanted

Post by satterley_sr »

The Lynx A nose is narrow and does not extend past the front of the body. The tail is short and low well under the height of the roll bar. Thanks for looking.
fv22
Posts: 86
Joined: June 24th, 2006, 8:38 pm

Re: Lynx A Bodywork Wanted

Post by fv22 »

The spare nose's I have don't sound like the right one. These are the big, ugly, "hammerhead" looking things. The nose you described sounds like the one I have on my car, no spares on that one although I wish I did. Not sure of the tail, will get it out by the weekend and take a picture for you
Matt
Posts: 86
Joined: June 24th, 2006, 7:55 pm

Re: Lynx A Bodywork Wanted

Post by Matt »

I have a complete Elite body for a Lynx. I think it was for a "B" but I am not sure. Will this work for you?
satterley_sr
Posts: 237
Joined: June 27th, 2006, 3:27 pm

Re: Lynx A Bodywork Wanted

Post by satterley_sr »

Matt,

Thanks but no, I need the circa '68 bodywork.
fv22
Posts: 86
Joined: June 24th, 2006, 8:38 pm

Re: Lynx A Bodywork Wanted

Post by fv22 »

Sorry but I've been so busy I forgot to dig out the bodywork I have. Will try to do it tomorrow and get pictures.
fv22
Posts: 86
Joined: June 24th, 2006, 8:38 pm

Re: Lynx A Bodywork Wanted

Post by fv22 »

Took long enough but I finally made it to the shed and brought out the nose and tail. Let me know if it's what you need. Bob
Attachments
20180209_121108.jpg
20180209_121102.jpg
20180209_121001.jpg
satterley_sr
Posts: 237
Joined: June 27th, 2006, 3:27 pm

Re: Lynx A Bodywork Wanted

Post by satterley_sr »

Bob,

Thanks for all the effort but those a Lynx B parts. Hopefully you can sell them to somebody with a Lynx B

Dave
Post Reply