Posting pictures
by
FV80 »
June 18th, 2015, 2:08 pm
» in
General Discussion
It is now possible to post pictures and other attachments on this forum. I would, however, suggest that, if the picture(s) is/are already posted...
0 Replies
60582 Views
Last post by FV80
June 18th, 2015, 2:08 pm
Board ANNOUNCEMENT ! and DONATIONS ...
Replies: 14
by
FV80 »
April 21st, 2015, 3:07 pm
» in
General Discussion
First post
This board has been moved from its old host and admin to a new location.
Last post
Hi Dietmar,
14 Replies
178768 Views
Last post by BLS
December 10th, 2023, 1:29 pm
oil coolers
Replies: 1
by
Dietmar »
June 15th, 2023, 1:39 pm
First post
Just thought I would pass on some info - in case some do not know.
Last post
Thanks for the info, Dietmar.
1 Replies
17688 Views
Last post by BLS
June 18th, 2023, 8:14 pm
Blood on the car...
Replies: 4
by
BLS »
December 22nd, 2021, 9:54 pm
First post
I've read in the past that something isn't truly yours until you've bled on it :) It's not the first time my car has drawn blood, but it's the first...
Last post
Sad situation when the most participated class historically and still near the top is shuffled into oblivion. I know there are regional participation...
4 Replies
24400 Views
Last post by BLS
December 23rd, 2021, 8:32 pm
Steering wheel / front tire angle
Replies: 2
by
BLS »
December 5th, 2021, 11:13 pm
First post
I am back to working on my car and hope to get it on the track in 2022. Several of my modifications I have lost some of my notes about. Prior to...
Last post
Heh, no promises but I am going to give it a try. Haven't retired, but finally have the beach house in pretty good shape. That's been a lot of work,...
2 Replies
16870 Views
Last post by BLS
December 6th, 2021, 9:30 pm
0 Replies
30374 Views
Last post by FV80
August 11th, 2021, 3:07 pm
Transmission oil
Replies: 2
by
Amberpowerpack »
January 16th, 2020, 11:51 pm
First post
New to this group and years ago I heard some used ATF as trans oil. Any truth and what weight is used?
Last post
Robert,
2 Replies
8160 Views
Last post by FV80
January 17th, 2020, 12:18 pm
Spark Plug Recommendation
Replies: 3
by
pickupjoeb »
May 12th, 2019, 1:28 pm
First post
I'm looking for plug recommendations for a 1964 FV Vintage 1200
Last post
For what it's worth......AND, while this applied a few decades back, I do not know that it is the same situation today:
3 Replies
10926 Views
Last post by sharplikestump
December 5th, 2019, 12:12 am
FV Spec Tire rules relaxed .. some
Replies: 1
by
FV80 »
February 22nd, 2019, 10:37 am
First post
This has just been posted by SCCA in the PRELIMINARY Minutes for March...
Last post
We also have multiple sets of nice slicks including a brand NEW set for sale. I am sure we can make a deal if any regional guys are looking.
1 Replies
4315 Views
Last post by GrahamLoughead35
February 22nd, 2019, 4:57 pm
Speedsport Disc Brake Installation
Replies: 6
by
jphoenix »
January 31st, 2019, 9:51 pm
First post
I received my disc brake kit from Al Varacins lat week and finished installing them over the weekend. I created a page on my website detailing the...
Last post
Thanks for the pics Jim, looks good.
6 Replies
12578 Views
Last post by BLS
February 2nd, 2019, 11:43 pm
FV Intake Manifold Measurements 2018
Replies: 4
by
FV80 »
September 9th, 2018, 9:34 am
First post
Intake manifolds haven't been mentioned here since 2016 I think, so I'm starting a new thread. This is from the Preliminary October Fasttrack Minutes...
Last post
Didn't mean to imply that .. just that manifold DQ can happen and why test it if there's no need?
4 Replies
5581 Views
Last post by FV80
January 24th, 2019, 7:47 pm
Brake thought for the month.
Replies: 19
by
brian »
June 18th, 2013, 3:34 pm
First post
Bleeding brakes is probably the most critical and most misunderstood process in the brake world. Drum brakes are more demanding than discs about...
Last post
...I was using one of those bleeder devices with the check valve....
19 Replies
41607 Views
Last post by FV80
January 3rd, 2018, 6:50 pm
Cam Wear
Replies: 31
by
satterley_sr »
May 25th, 2011, 5:09 pm
First post
Just discoverd the cause of low power ( really low, about 35 hp on the dyno). Turns out the valves are only opening about .150 . haven't cracked it...
Last post
Whole lot of theorizing going on here. Simple fact: It's the oil. I believe it is the EPA that is dictating the new standard because of the supposed...
31 Replies
39635 Views
Last post by sharplikestump
December 28th, 2017, 5:25 pm
Ackerman
Replies: 5
by
jphoenix »
December 5th, 2014, 10:12 pm
First post
This past season I spent most of my time at the track adjusting my suspension. I read all the threads on this forum, the Schings book and other...
Last post
You need to study ackerman first, just search it. Then you will understand the answer to your question better, which is that yes, you must modify...
5 Replies
8513 Views
Last post by BLS
June 11th, 2017, 4:23 pm
Engine oil Viscosity
Replies: 37
by
fvracer27 »
June 3rd, 2013, 9:34 pm
First post
What are most using for our engines?
Last post
[quote= brian We've know each other, what 25 years? I'll compare my results and junk pile to yours anytime, I'm out (mike drop)
37 Replies
187174 Views
Last post by hardingfv32
August 29th, 2016, 12:22 pm
FV Intake Manifold Rules Clarification July 2016
Replies: 23
by
Mike Kochanski »
July 27th, 2016, 10:13 pm
First post
Below is a letter I wrote to the SCCA CRB on February 10, 2016 asking for a rules clarification regarding color on the exterior surface of the...
Last post
Hang on folks the revised AD Hoc committee will have greater authority than ever before and will have access to all the letters. Get your pens out....
23 Replies
181164 Views
Last post by brian
August 20th, 2016, 2:01 pm
Spindle Checking device
Replies: 5
by
FV80 »
April 4th, 2016, 9:57 am
First post
As I was checking one of my spindles yesterday, I thought I should share my 'device' info with the group - then I remembered I already did some time...
Last post
I'll need to see the inside of your toolboxes the next time we cross paths. :)
5 Replies
14782 Views
Last post by FV80
May 2nd, 2016, 3:03 pm
Transponder location
Replies: 3
by
Bob Posner »
March 14th, 2016, 7:50 pm
First post
Any rule as to where the transponder must be located? Will the signal pass through fiberglass ? Thanks
Last post
Mine goes through the fiberglass on the bottom of my nose cone. Never had an issue.
3 Replies
11963 Views
Last post by smsazzy
March 28th, 2016, 9:52 pm
Attaching speed sensor pickup
Replies: 7
by
jphoenix »
March 4th, 2016, 6:26 pm
First post
Where and how is the best method for attaching an AIM speed sensor and magnet. I saw one vee that has the pickup attached to the right front brake...
Last post
Yes, noisy signal, rpm fluctuation due to noise.
7 Replies
23933 Views
Last post by jphoenix
March 8th, 2016, 4:07 pm
Carbotech brake shoes
Replies: 5
by
jphoenix »
February 16th, 2016, 10:08 pm
First post
Are carbotechs currently the preferred brake shoe? I'm running Porterfields now and seem to work fine, but not cheap. Neither are Carbotechs, but...
Last post
I could not find any info on brake shoes. This web site is all disc pads
5 Replies
21240 Views
Last post by brian
February 18th, 2016, 5:03 pm
P2 leading arm
Replies: 4
by
jphoenix »
February 9th, 2016, 10:55 pm
First post
Anyone know if the P3 leading arms are identical to the P2 leading arms? We have a new guy here with a P2 that needs a replacement leading arm, old...
Last post
Try Bob Williams who you met last summer at the ridge he has a p3. I'm gone til Monday if you need contact info
4 Replies
10784 Views
Last post by Bob Posner
February 11th, 2016, 6:53 pm
Transaxle ratio spreadsheet
Replies: 3
by
jphoenix »
February 5th, 2016, 6:39 pm
First post
I found the posts that describe turning the wheel 10 revs and counting the input shaft to determine the gear ratio, but the links to the spreadsheet...
Last post
That's great, thanks Steve.
3 Replies
7807 Views
Last post by jphoenix
February 6th, 2016, 11:00 pm
Forged Pistons
Replies: 23
by
FVartist42 »
June 9th, 2015, 4:32 pm
First post
Since there is a problem acquiring pistons with the proper ring groove width, what is the problem with a forged piston designed to our...
Last post
yea, I'm dyslexic and mess up writing numbers occasionally. Two and a half thousands to four and a half thousands.
23 Replies
50424 Views
Last post by brian
January 25th, 2016, 5:51 pm
Leading arm attachment
Replies: 60
by
jphoenix »
October 3rd, 2015, 1:34 pm
First post
Here's another question for the FV folks who would know: I saw this axle flange arrangement on an FV (Protoform I think) and I was wondering what the...
Last post
I guess I am assuming that some weight is transferred across via the spring. If there is an upward push on the outside tire doesn't that translate to...
60 Replies
125660 Views
Last post by jpetillo
November 6th, 2015, 9:53 am
Suspension travel
Replies: 1
by
jphoenix »
October 2nd, 2015, 5:37 pm
First post
I watched Michael Varacins win the runoffs - what a great race that was!
Last post
Generally you want the car as low as possible... but then there are always some compromises to be made.
1 Replies
4880 Views
Last post by hardingfv32
October 4th, 2015, 12:50 pm
Polishing transmission gears
Replies: 8
by
brian »
September 28th, 2015, 2:35 pm
First post
As always, there were a lot of conversations about rules and cars at the runoffs. One of these conversations concerned polishing or REM treatment of...
Last post
1) I never said the the carb modification was legal before the rule change. What I did say was that a simple radius makes all carb tops equal. That...
8 Replies
10680 Views
Last post by hardingfv32
October 3rd, 2015, 9:45 pm
Brake drum wheel stud conversion
Replies: 2
by
FVartist42 »
June 29th, 2015, 4:08 pm
First post
Does anyone know a wheel stud that can be used on our drums for standard and the ones that have been drilled to put in heli-coils? I've heard of a...
Last post
Bugformance carries press in studs I use. They require drilling out the drum to fit the studs and the studs have a flange that needs to be cut down a...
2 Replies
6949 Views
Last post by brian
June 30th, 2015, 1:23 pm
Tranny options for Daytona
Replies: 1
by
brian »
June 9th, 2015, 5:15 pm
First post
Congrats and thanks to Stephen for all his hard work on the forum.
Last post
A short box won't work (unless your engine can pull WELL beyond 7 grand with AUTHORITY.... without a tow). Anything else you have should be...
1 Replies
4674 Views
Last post by FV80
June 9th, 2015, 10:44 pm
Making a New body for my FV
Replies: 7
by
jphoenix »
March 19th, 2015, 12:32 pm
First post
I increased the wheelbase of my modified Caracal C (actually a Brian R Mcarthy creation) to provide another inch of legroom. The wheelbase is now...
Last post
Good points Steve, I measured the WB with car up on the stand, front suspension hanging by the limit cables. I think (but not sure, need to get the...
7 Replies
10466 Views
Last post by jphoenix
March 23rd, 2015, 8:32 pm
Beehive Valve Springs
Replies: 25
by
satterley_sr »
November 24th, 2014, 9:30 pm
First post
Anyone running the beehive valve springs and if so where did you get them? Thanks
Last post
Brian
25 Replies
66714 Views
Last post by satterley_sr
December 10th, 2014, 11:14 pm
Brake shoes
by
FVartist42 »
September 23rd, 2014, 3:08 pm
I was notified of a brake shoe, where they were of a reasonable cost. I along with a few others have found them to work reasonably well. We will be...
0 Replies
6957 Views
Last post by FVartist42
September 23rd, 2014, 3:08 pm
carb repair
Replies: 3
by
zink29 »
June 25th, 2014, 3:13 pm
First post
I have a carb that leaks gas around the throttle shaft. I am seeking a source to bush the throttle shaft.
Last post
I f interested' give me a call after Sunday-on the road
3 Replies
6615 Views
Last post by Dietmar
June 27th, 2014, 2:05 am
AV Gas
Replies: 6
by
bobc »
June 20th, 2014, 3:54 pm
First post
After my local airport refused to sell me gas citing a FAA ruling I decided to do something. The first step to file a Federal lawsuite is to send a...
Last post
Our local airport said that they cannot knowingly sell fuel for non-aviation purposes, but advised (wink, wink) that the self-service pumps were open...
6 Replies
13078 Views
Last post by jphoenix
June 21st, 2014, 3:03 pm
Citation Setup recommendations
Replies: 7
by
BLS »
May 22nd, 2014, 1:26 am
First post
Checking my alignment and attempting to get a good starting point for the rear zero roll setup.
Last post
Larry, Thank for the information you sent. It will be very helpful.
7 Replies
9634 Views
Last post by BLS
May 23rd, 2014, 11:13 pm
CRB - Disk Brakes
Replies: 4
by
hardingfv32-1 »
May 11th, 2014, 12:12 pm
First post
In the CRB's recommendation to approve disk brakes:
Last post
There seems to be some confusion regarding the status of the disc brake proposal so let me take a couple of lines for explanation.
4 Replies
10294 Views
Last post by brian
May 20th, 2014, 2:13 pm
disc brake survey
by
brian »
March 17th, 2014, 2:43 pm
In this month's Fastrack at SCCA.com asking for a yes or no input on the possibility of adding disc brakes to vees,
0 Replies
5411 Views
Last post by brian
March 17th, 2014, 2:43 pm
warning. dont do this
Replies: 9
by
kidkoh »
October 6th, 2009, 5:46 pm
First post
I got a motor that was in great shape it was never touched inside and it only had about 60,000 miles. I thought is would be a great spare motor but...
Last post
The AS41 VW case. (What most are probably using) is Mag alloy AS41 (4% aluminum and 1% Silicon) thus AS41.
9 Replies
11489 Views
Last post by sharplikestump
March 8th, 2014, 4:49 am
Temperature Warning Light
Replies: 5
by
WilkmanRacing »
March 2nd, 2014, 3:29 pm
First post
Does have any experience hooking up a warning light that can be programmed to come on at a preset temperature?
Last post
You are correct - not adjustable, but a warning light nonetheless... maybe it's already the right temperature :lol:
5 Replies
7631 Views
Last post by FV80
March 4th, 2014, 4:44 pm
Cleaning engine case
Replies: 3
by
bobc »
February 13th, 2014, 9:38 am
First post
What is the best way to get a case really clean. I understand that you can not hot tank them. Is this correct?
Last post
If you want to clean the Mag/Al case back to a almost pure white, mix muriatic acid with about 5 parts water.. Put it in a disposable spray bottle....
3 Replies
5851 Views
Last post by SR Racing
February 14th, 2014, 4:59 pm
New Head-n-neck system
Replies: 1
by
Jeremy Soule »
February 13th, 2014, 3:30 pm
First post
There is a new head and neck system coming out from Zamp Racing, wwww.zamp-racing.com (click auto then the neck tech icon) it looks good in the...
Last post
Looks like another copy of the Hans except for adjustment. I'm going to guess they'll loose in court...
1 Replies
4330 Views
Last post by BLS
February 13th, 2014, 4:13 pm
Bleedin' clutch slave...
Replies: 17
by
BLS »
July 14th, 2013, 6:51 pm
First post
That title can be taken as a derogatory comment or a question. It's both.
Last post
I had forgotten to update this just in case anyone does a search with similar problem.
17 Replies
18286 Views
Last post by BLS
February 8th, 2014, 1:54 am
FV Side Intrusion Panels
by
problemchild »
January 24th, 2014, 9:36 am
There was a thread on Apexspeed about side protection that had a lot of interest from FV drivers.
0 Replies
9370 Views
Last post by problemchild
January 24th, 2014, 9:36 am
Retro Letter 2004 or Why SCCA System Sucks
Replies: 4
by
problemchild »
October 10th, 2013, 9:55 am
First post
I was looking for some bio material and found this correspondance on my PC.
Last post
Interesting that I hear all this talk about part shortages, but nobody buys parts when I list them for sale. After investing and storing for...
4 Replies
18004 Views
Last post by jhenn4716
December 14th, 2013, 2:02 am
Clutch lever
Replies: 6
by
jphoenix »
December 7th, 2013, 9:09 pm
First post
The clutch lever on my transaxle has almost fallen off. From the marks, it appears to have been in this position for some time. I quick tap with a...
Last post
It's a 15 mm circlip, got a pack of 5 from McMaster.
6 Replies
12330 Views
Last post by jphoenix
December 13th, 2013, 12:11 pm
Broken Fins
Replies: 1
by
leftwingorange »
November 25th, 2013, 10:44 pm
First post
I am getting ready to install a recently rebuilt motor and noticed that there are two broken fins on cylinder 3. Each broken piece is about 2 inches...
Last post
Bottom fins should be no issue. The larger the fin, the greater impact it might have. Also depends on how much is broken off. If the missing part is...
1 Replies
4379 Views
Last post by FV80
November 25th, 2013, 11:51 pm
77MM Pistons?
Replies: 41
by
Veefan »
January 25th, 2011, 2:16 pm
First post
I'm selling some spare parts on e-bay, one item I have listed is a set of 77mm .020 over pistons.
Last post
Flexing? Are we talking about the crank bending or twisting along it's axis? Bending
41 Replies
43577 Views
Last post by sharplikestump
October 24th, 2013, 7:36 pm
Mounting tires tips
Replies: 6
by
gdavis »
October 1st, 2013, 8:34 am
First post
I have one of those manual Chinese tire changers and am going to attempt to flip my tires using it. I know that with our short, stiff sidewalls,...
Last post
I've found a thin coat of white lithium grease on the wheel and the tire bead (then some tire lube) helps greatly in getting the tire on easier and...
6 Replies
13892 Views
Last post by Hal
October 7th, 2013, 3:11 pm
Av Gas & regular gas mix?
Replies: 5
by
gdavis »
September 25th, 2013, 10:51 am
First post
How advisable would it be to run a 50/50 mixture of regular unleaded pump fuel with avgas? I have heard that our engines actually produce a bit more...
Last post
I agree with Greg. The only race gas company that uses it's own refineries is Shell. They say it makes a difference and I'm inclined to agree....
5 Replies
11333 Views
Last post by brian
October 2nd, 2013, 12:44 am
Micro SD card size
Replies: 5
by
gdavis »
September 23rd, 2013, 3:57 pm
First post
I just purchased an Emerson HD Action video camera(EVC 355) and was wondering if I could get some advice as to what size micro sd card(s) I would...
Last post
Thanks for the advice Steve and FV22.
5 Replies
7989 Views
Last post by gdavis
September 26th, 2013, 10:48 am
Rear Control Arm Sheathing
Replies: 1
by
hardingfv32-1 »
August 30th, 2013, 1:44 pm
First post
Opinions....
Last post
If it moves independent of the chassis, it cannot be called bodywork. thus, unless you have some kind of other interpretation, it would not be legal.
1 Replies
7598 Views
Last post by smsazzy
August 30th, 2013, 8:16 pm
Rear axle bearing retainers
Replies: 1
by
gcurl »
August 18th, 2013, 8:06 pm
First post
I pulled the axles last night while hunting down leaks and noticed I have two different bearing retainers. This explains the leak I've had on the...
Last post
I have some shorter bearing retainers. paypal me $10 to my e-mail address & i will send you one.
1 Replies
4625 Views
Last post by satterley_sr
August 20th, 2013, 5:01 pm
Let's fold FST into FV
Replies: 13
by
Stan »
August 15th, 2013, 5:05 pm
First post
I finally bit the bullet and sent this letter to the CRB.
Last post
MOFOCO has recondtioned link pin front ends for $349. BJ front ends for $389. Link pin front ends have long been the preferred choice for off road.
13 Replies
16640 Views
Last post by brian
August 19th, 2013, 3:21 pm
Forum permissions
You cannot post new topics in this forumcannot reply to topics in this forumcannot edit your posts in this forumcannot delete your posts in this forumcannot post attachments in this forum