FORMULAVEE.ORG

find an empty lot, you should be able to get in about 15 min before the fun police show up. when they do offer the nice officer a ride and maby he will look the other way.it worked for me

ok I just took apart my new carb to adjust the float and I noticed that the float is not attached to the arm. I then looked at another carb i had and it is the same. my question is should the float be attached to the arm that goes across the bowl. it also seems that the float is upside down from the...

thanks

I can take a pick but I can never get one on this site. the gap is between the top of the spindle between the spindle and the dogbone causing the spindle to rise up on the king pin. there is a steel spacer there now but the space between the carrier/dogbone and the top of the spindle is the issue. s...

ok so I am checking out my car for the next race and I noticed that there is a "gap" between the spindle and the carrier. it is not a huge gap, probibly about .025 with a feeler guage. my question is can I shim the space between the carrier and the spindle to take up the space or should I ...

ok I bought a new carb and installed it for practice at nhis, every time i went into turn 3 ( hard breaks hard rt turn ) the car stumbled. I think that the float is not set right but I cant find any info on how to set the correct level. any info with the correct setup would be great. just a question...

ok I am sure this will sturr up a big argument but I think that the best solution to the super expensive intakes would be a clamer rule.I know that this works for the circle track people so stay with me on this I am looking to buy a new intake for next season, now I can buy a good intake for regiona...

that is what this case is destined for a big bonfire

I got a motor that was in great shape it was never touched inside and it only had about 60,000 miles. I thought is would be a great spare motor but it was covered in grease so I sent it to my local engine shop (not a vw guy) to get cleaned in his hot tank and jet washer. he aparently left the case i...

has anyone used the Iracing site. Does it help I am thinking of joining but I wanted to ask if anyone has tried it they don't have a vee in the list of cars but I am sure I can find a car that is close.
this is NOT an advertisment for the site just a solisitaiton for opinions

be carfull when you go out for the test day. I always start in the very back you will be on the track with some very fast open wheel cars and some spec fords. you want to let them go by early, they can pass you anywhere and their closing speed is ridiculous you will see me there in the afternoon, wa...

I have about 15 smooth rims sandblasted painted and cleared.they are good rain rims or use for trailer rims. they are 1 pound heavier than slotted but they are straight and cheep I am asking $35 each. they are located in new hampshire e-mail me at kidkoh99@hotmail.com if you want to see some picks

I am running out of options I need a set of rear coil over rear shocks for my d-13 does anyone have a set that they would be willing to sell cheap or does any body know the length and valving I should have. what shocks should I try to look for any help would be greatfull

when they say that they are arcing, they are not talking about arc welding they are talking about getting the arch of the shoe to match the arch of the drum. everybody has to do this when they get new brake shoes but you will hear a few diffrent ways to do this. some will tell you to go fast and sla...

any spring shop should be able to make you a set of u-bolts. I had a set made for $20.they are 2 3/4 wide center by 4 3/4 long as for the setup I will try to scan a scamatics of the rear suspension that I got with the car. they should be in the original buld sheets that was offerd to you. let me kno...

ok first I would never add safty equipment in with your plans for budget racing. you can buy a cheep helmet and fire suit but I would say get the best one that you can afford. you can get a lower cost suit and wear underware but remember, for now there is no experation on the suit so you can offset ...

I am looking for a 122 third gear, does any body have an "extra" that is hanning on the garage wall that they are willing to sell? let me know if you have one so I dont have to buy one new thanks
kidkoh99@hotmail.com

it should be legal the bottom sump is no larger than the ring to mount it to the case. its hard to see in the pic but the sump is larger at the bottom so there is a lip to keep more oil in the bottom. . it comes with everything you need. sorry for the advertiser but I think that it is a cool item th...

check e-bay under formula vee. there is a large capacity oil sump with pickup for sale. just so there is no confusion this is a friend of mine and I will be buying one for myself

I can now sell this car complete if it helps. I will install a good regional motor for 1600 extra. you could be on the track as soon as the snow melts. five grand for a turn key car, you cant beat that. if not i WILL be raceing it this year thanks

the writing is real bad but i think it says henry henscher then chuck A piorts? then david fiedeikson the only name that i can clearly read is Robert L goodman. the car was at la junta rio grand hutchinson pueblo afton and phenix. there are others and more names that I cant read. I hope this quenche...

the earliest log book i have says it was raced at pueblo so I dont think that it started in illinois but it may have raced there sometime in its life. it looks like it started out in the southwest and made its way east sometime around the time i was 10 or 11 years old

no the car is still in my garage. I will be running it next year, maby someone will buy it over the summer but untill then I am going ahead with the winter repairs/upgrades

my d-13 has side bars about where my sholders are in the car, I have had the privlige of being lift towed using the bars with no issue. the tow driver put a y strap around the two bars and one around the beam and he had the car in the air in less than 2 minuets. why would I want to cut the body of m...

it does not matter where the spring pack goes but you will need to use the center grub screw to hold the spring in place, most people put the spring in the bottom tube because the steering box will not go on with the grub screw in place