Search found 23 matches

by shirleymac
September 2nd, 2012, 10:31 am
Forum: Novice Area
Topic: first time reinstalling engine
Replies: 3
Views: 4188

Re: first time reinstalling engine

The clutch was reinstalled when the engine was rebuilt so that part is done. Thanks for the advice Dietmar.
by shirleymac
September 1st, 2012, 5:10 pm
Forum: Novice Area
Topic: first time reinstalling engine
Replies: 3
Views: 4188

first time reinstalling engine

I just got my engine back after having it rebuilt and in my shop manual it says to "Apply a light coating of moly-based grease to the splines of the transaxle imput shaft and the faace of the clutch release bearing." My question is. Is there a specific type of grease I need to use or will ...
by shirleymac
August 20th, 2012, 5:35 pm
Forum: Tech Tips, Rules, and Safety
Topic: A few questions about heads
Replies: 9
Views: 5366

Re: A few questions about heads

I had a similar problem last year with a Keensert that failed. It was stuck to the spark plug and in the process of changing plugs it striped the threads on the head. I had a engine shop that specializes in repairing aluminum heads for drag racing do the repair. He welded the hole closed and then re...
by shirleymac
May 28th, 2012, 1:02 pm
Forum: General Discussion
Topic: clutch not holding pressure
Replies: 3
Views: 2267

Re: clutch not holding pressure

After further inspection I may have found my problem. A real small crack in the hose leading from the reservoir to the master cylinder. It was small enough that it did not leak but may have been big enough to suck air into the system.
by shirleymac
May 27th, 2012, 10:21 pm
Forum: General Discussion
Topic: clutch not holding pressure
Replies: 3
Views: 2267

clutch not holding pressure

Over the winter I removed the clutch/brake assembly to replace some worn out parts. After reinstalling I had no problems bleeding the brakes. But when I trying to bleed the clutch the peddle starts out feeling firm but after pumping it a couple of time it goes soft. I've bleed the clutch around 5-6 ...
by shirleymac
October 25th, 2010, 9:40 pm
Forum: Tech Tips, Rules, and Safety
Topic: oil pressure relief valve
Replies: 10
Views: 7191

Re: oil pressure relief valve

I got the valve out with a cold chisel and hammer. It took a couple of hits to get it turning but came out pretty easy. I'm going to replace them with the allen head screw I saw on CB Performance's website.
by shirleymac
October 21st, 2010, 11:32 pm
Forum: Tech Tips, Rules, and Safety
Topic: oil pressure relief valve
Replies: 10
Views: 7191

oil pressure relief valve

I want to check the condition of the oil pressure relief valve and want to know what is the best way to remove the screw from the engine block? Is there a special tool or do I just need to get a really big screw driver?
by shirleymac
October 26th, 2009, 10:30 pm
Forum: Vehicles .. Race / tow / trailer / Rigs
Topic: Shirley Maclane SM1 For Sale
Replies: 6
Views: 2485

Re: Shirley Maclane SM1 For Sale

The car is located in Des Moines, Iowa
by shirleymac
August 19th, 2009, 9:36 pm
Forum: Vehicles .. Race / tow / trailer / Rigs
Topic: Shirley Maclane SM1 For Sale
Replies: 6
Views: 2485

Re: Shirley Maclane SM1 For Sale

No I still have my vee.
by shirleymac
July 12th, 2009, 10:39 pm
Forum: Vehicles .. Race / tow / trailer / Rigs
Topic: Shirley Maclane SM1 For Sale
Replies: 6
Views: 2485

Re: Shirley Maclane SM1 For Sale

I've tried to upload photos of my car but can't seem to get them to work. So here is a link to a post I have on Apexspeed.

http://www.apexspeed.com/forums/showthr ... post219161
by shirleymac
July 8th, 2009, 12:38 pm
Forum: Vehicles .. Race / tow / trailer / Rigs
Topic: Shirley Maclane SM1 For Sale
Replies: 6
Views: 2485

Shirley Maclane SM1 For Sale

Shirley Maclane SM1 is for sale. I need to sell my vee as soon as possible if possible. Do to an upcoming divorce I can not keep the car. Included in the sale would be the car and all spare parts and a 2008 6'x 12' H&H enclosed trailer. The car pasted it's annual tech earlier this year and has n...
by shirleymac
February 16th, 2009, 10:36 pm
Forum: Novice Area
Topic: oil filter location
Replies: 9
Views: 4743

Re: oil filter location

The oil filter in my car is mounted vertically to the left side of the firewall. It's kind of a tight fit but it is easy to get to to change.

Tony
by shirleymac
January 11th, 2009, 12:13 am
Forum: General Discussion
Topic: Sort of a poll
Replies: 11
Views: 4806

Re: Sort of a poll

I plan on doing my drivers schools this spring Midiv has a double school/regional race on the scheduled for April 17th-19th at MidAmerica Motorplex. I'm planning on running the other two regional races at MAM if everything goes okay in April.

Tony
Shirley MacLane sm1 FV #19
by shirleymac
January 9th, 2009, 11:24 pm
Forum: Tech Tips, Rules, and Safety
Topic: Head and neck systems ... request for input
Replies: 17
Views: 7928

Re: Head and neck systems ... request for input

I feel the decision should be up to the driver to either use one or not. But as I put in my letter to the CRB, my opinion is that if they mandate a device all FIA and SFI devices should be available to use, and let the individual driver select the device that best works for their car. After looking ...
by shirleymac
December 9th, 2008, 8:37 pm
Forum: Solo Vee
Topic: Fuel tanks?
Replies: 13
Views: 6401

Re: Fuel tanks?

Hi Greg,

I'm the current owner of the original Shirley MacLane FV, do you have any pictures of the original steel fuel cell? And what price would you'd like for it?

Thanks
Tony Siembieda
by shirleymac
December 3rd, 2008, 9:08 pm
Forum: Tech Tips, Rules, and Safety
Topic: Head and Neck Restraints
Replies: 16
Views: 6428

Re: Head and Neck Restraints

I really don't have a problem with SCCA mandating the use of a H&N device, as long as they decide what specs they're going to use (FIA, SFI or both) and then allow each individual to decide which device will work best for there situation. And not mandate that I have to use one device that may no...
by shirleymac
November 15th, 2008, 12:09 am
Forum: Solo Vee
Topic: And the 2009 PAX for F Modified is . . .
Replies: 6
Views: 3228

Re: And the 2009 PAX for F Modified is . . .

I read on Apexspeed that Jay Novak is building a 600cc F500 car. From what I've read, Jay's proposal is that if you race a F500 you would have the choice to choose either the traditional 2 stroke engine with clutches or a 600cc motorcycle engine and transmission both combinations would race in the s...
by shirleymac
July 20th, 2008, 10:48 pm
Forum: Novice Area
Topic: gauges working properly
Replies: 8
Views: 4659

Re: gauges working properly

Well I finally had a chance to check the temperature sender--I tried the lighter method. With heat on the sender for a couple of minutes and the gauge not moving off the peg, I'm assuming the sender is bad. My next question is does SR Racing carry a replacement that will work on my car? The sender h...
by shirleymac
July 15th, 2008, 9:01 pm
Forum: Novice Area
Topic: gauges working properly
Replies: 8
Views: 4659

Re: gauges working properly

Thanks for the information. I'm still trying to find the time to check everything out, but I did go out and tried turning the ignition on and the needle did jump and go back to zero. When I disconnected the wire from the sender and grounded it to the frame the needle jumped all the way to the left. ...
by shirleymac
July 13th, 2008, 11:01 pm
Forum: Novice Area
Topic: gauges working properly
Replies: 8
Views: 4659

gauges working properly

What is the best way to check that the oil temp and oil pressure gauges are working correctly? I have VDO gauges and the oil temp does not move off the peg even after the engine has been run. My oil pressure gauge shows around 50 lbs at idle. I read the section on oil pressure in the Getting Started...
by shirleymac
June 4th, 2008, 10:12 pm
Forum: Novice Area
Topic: Trailer Question?
Replies: 7
Views: 4113

Re: Trailer Question?

I use a 6x12 H&H trailer. I had to make some short ramps to clear the edge of the ramp door. The car has about 4" on each side and enough room up front with the nose off for the easy-up and a small spare parts box. I'm still trying to figure out the best way to store an extra set of tires.
by shirleymac
May 25th, 2008, 10:55 pm
Forum: Vee Photos
Topic: Shirley Maclanes new home
Replies: 3
Views: 2728

Re: Shirley Maclanes new home

I knew as soon as I put the number on the side of the car it would not work. :oops: I'm going to try keeping the white and add a thick black outline should look like this picture. Making the change will be easy, it helps having a brother with a sign making business.
by shirleymac
May 24th, 2008, 9:29 pm
Forum: Vee Photos
Topic: Shirley Maclanes new home
Replies: 3
Views: 2728

Shirley Maclanes new home

I purchased Shirley Maclane last year and have been working on getting her ready for this year. Heres a couple of photos of the new paint and number.