FORMULAVEE.ORG

The rear supports itself. Once it is free the engine can be slid forward and lifted straight up.

Yes. The new sidewalls are stiffer, it takes a bit more effort to mount them. I did two sets last week.

I've been using a manual machine that I bought from Roger Kraus Racing that I got about 25 years ago. works with all wheels and tires except the cantilever formula ford .

Complete car
Less
Engine
Gearbox, drum to drum
Front end assembly
Wheels

Greg,
Call Steve Pastore 203-778-2337. Hanging on his wall is an aluminium wheel < 9 in. with a flat bottom,

Autowerks
Dunellen, NJ
Dave Carr
732-968-5591

Falcon Racing ( Dave Kazmierczak)
62467 Oak Road
South Bend, Indiana 46614
574-289-7223
Does very good work

Jim,
Thats Saturday 1:30 Central

mylaps.com, search "SCCA"

There appears to be a lot of confusion concerning the proposed changes to the manifold rules. Most of us do not have enough information to make an informed decision about the proposed changes. The background, as I understand it. At the 2008 Runoffs a number of questionable manifolds appeared. The SC...

Why do we care about outside diameter or weight. All we need is an inside diameter measured about a half to 3/4 of an inch above the manifold base. All that would be needed to check would be a ball or better a cylinder.
Dan

These measurements were first used in 1971. Prior to that the only rules concerning intake manifolds were 1- matching of manifold flanges is permitted, & 2- removal of the intake manifold heat riser tube. The 1971 rules also permitted removal of material from the interior of the intake manifold,...

Hi Bill,
Steve Pastore has the fixture.
VSR
203-778-2337

Check this out. New PREDATOR P3A FV For sale -------------------------------------------------------------------------------- Here is a really nice clean FV that I had the chance to look over myself. The kit was started by Keith Underwood and Keith never had the chance to run it before his sudden pa...